+49 241 52 30 30 (DE) Alle Standorte

Turbo-Vaporizer 2841PE

Artikelnr: 2841PE

*Diese Seite ist leider nur in Englisch verfügbar.*

The 2841PE MSP Turbo™ Vaporizer was designed for high flow water vapor. This model has the state-of-the art PE atomizer with on-board flow control, and dual heaters to combat evaporative cooling at high water flow rates.


Nicht mehr lieferbar
*Ein neueres Modell dieses Produktes ist jetzt verfügbar.

Produktdetails

Dimensions

297 mm x 119 mm x 122 mm (11.7 in. x 4.7 in. x 4.8 in.)

Fittings (on the unit) Carrier Gas Inlet 1/4 in. VCR female split nut
Liquid Inlet 1/8 in. VCR female
Vapor Outlet 1/4 in. VCR female
Compressed Air 4 mm instant tube fitting
Wetted Parts SS 316, PEEK, PCTFE, PTFE, Kalrez®, Elgiloy®
Leak Integrity <1 x 10-9 scc/sec Helium
Heater Power Requirements 208 VAC, 60 Hz, 500W
Carrier Gas Inert gas recommended
Gas Inlet Pressure Range 0–80 psig inlet pressure
Max. Carrier Gas Flow Rate* N2 15 standard L/min**
Max. Liquid Flow* TEOS equivalent 3,000 g/hr
Max. Liquid Flow* DI Water 300 g/hr
System Pressure Limit 120 psig
Compressed Air 90 to 110 psi
Temperature Range 40°C to 200°C
Vaporizer Body Vacuum tight chamber with multi-stage heat exchanger, SS 316 construction
Temperature Sensor Type K thermocouple

Specifications subject to change without notice
* Liquid and gas flow ranges are affected by liquid and gas type
** Standard model up to 7 standard L/min; up to 15 standard L/min available