+49 241 52 30 30 (DE) Alle Standorte

Particle Deposition Systems

Today's Standards for Tomorrow's Yield

Particle Deposition Systems

*Diese Seite ist leider nur in Englisch verfügbar.*

MSP’s 2300G3 Particle Deposition System sets the standards for wafer inspection and metrology equipment. This advanced tool is vital for increasing the yield of future leading-edge devices, while meeting the measurement needs of today.

Accurate. Repeatable. Consistent.

The 2300G3 Particle Deposition System deposits PSL spheres, MSP’s NanoSilica™ Size Standards, and other SiO2 particles to produce wafer calibration standards with SI traceability. These standards calibrate and qualify your wafer inspection tools for use in semiconductor device manufacturing.

Deposited particle size and count are controlled with precision, accuracy, and repeatability so the calibration standards are consistent from substrate to substrate.

The Model 2300G3 also deposits particles generated from MSP Process Particles™ Suspensions to help characterize the material dependence of inspection/metrology tool response to defects.

Features and Benefits

  • Full (blanket), Spot, Arc, and Ring deposit patterns
  • Precise recipe control of deposited particle size
  • Nanoparticle atomization for clean particle generation down to 10nm
  • Differential Mobility Analyzer (DMA) size classification for narrow size distribution selection
  • Minimization of particle clusters and residue particles
  • Recipe control of deposit pattern width
  • Recipe, deposition, and suspension analysis reports
  • Ergonomic design
  • Worldwide service and support

Applications

MSP’s 2300G3 Particle Deposition System meets today’s measurement applications, including:

  • Traceable inspection system calibration
  • Matching legacy wafer calibration standards
  • Incoming bare wafer inspection/qualification
  • Determining inspection sensitivity for proprietary films
  • Blanket film monitoring
  • Inspection tool development and qualification
  • Process tool qualification, process learning and monitoring

Find the right model

Model Substrate Loading Supported Substrates Particle Size Range
2300G3A - 10 nm (2334) Automatic 200 mm wafers (optional)
300 mm wafers
10 nm - 2 µm
2300G3M - 10 nm (2335) Manual 150 mm wafers
200 mm wafers
300 mm wafers
10 nm - 2 µm
2300G3A - 20 nm (2332) Automatic 200 mm wafers (optional)
300 mm wafers
20 nm - 2 µm
2300G3M - 20 nm (2333) Manual 150 mm wafers
200 mm wafers
300 mm wafers
20 nm - 2 µm
2300G3M - 30 nm (2337) Manual 150 mm wafers
200 mm wafers
300 mm wafers
30 nm - 2 µm

 

Applicable to All Models

Particle Types

Particle Size Range (Three Versions)

  • 10 nm to 2000 nm, DMA-classified
  • 20 nm to 2000 nm, DMA-classified
  • 30 nm to 2000 nm, DMA-classified

Particle Size Accuracy

  • ±0.5 nm (Dp ≤ 50 nm)
  • ±1% of peak diameter (Dp > 50 nm)

(Not including uncertainty intrinsic to the particle reference materials used for calibration of the DMAs.)

Manual-Load 30 nm Particle Deposition System 2300G3M – 30nm

*Diese Seite ist leider nur in Englisch verfügbar.*

This manually...

Manual-Load 10 nm Particle Deposition System 2300G3M - 10 nm

*Diese Seite ist leider nur in Englisch verfügbar.*

This...

Auto-Load 10 nm Particle Deposition System 2300G3A - 10 nm

*Diese Seite ist leider nur in Englisch verfügbar.*

This...

Manual-Load 20 nm Particle Deposition System 2300G3M - 20nm

*Diese Seite ist leider nur in Englisch verfügbar.*

This...

Auto-Load 20 nm Particle Deposition System 2300G3A - 20 nm

*Diese Seite ist leider nur in Englisch verfügbar.*

This...

Page 1 of 1
Items Per Page