This website uses cookies
Le site internet ne stocke plus que les cookies essentiels sur votre ordinateur. Si vous n'autorisez pas les cookies, il se peut que vous ne puissiez pas utiliser certaines fonctionnalités du site, par exemple: se connecter, acheter des produits, voir le contenu personnalisé, passer d'une langue à l'autre. Il est recommandé d'autoriser tous les cookies.
+33 (0)1 41 19 21 99 (FR) Tous les sites


IFA-300 Constant Temperature Anemometer FR

UGS: 183151

Détails du produit

The IFA 300 Constant Temperature Anemometer (CTA) is a state-of-the-art research anemometer capable of meeting the most demanding measurement requirements. Whether your application involves measurement of high speed flows (gas or liquid), measurement of very low turbulence intensities, or the use of a high-power bridge, the IFA 300 can provide the solution. It represents the depth of design capability and an understanding of the dynamics of constant temperature anemometry, which TSI has developed over the past 50 years of building exceptional anemometry products. 

The IFA-300 anemometer can be used with all thermal anemometer probes manufactured by TSI, in order to perform velocity measurements in gas or liquid. The unit is designed to house up to eight CTA channels in one cabinet, with a total of 16 CTA with two cabinets. These arrangements allow multiple thermal anemometer probes to be used for measurements of multiple components (1D, 2D or 3D), and in multiple locations in the flow field.


  • SmartTune™ automatic bridge optimization technology
  • High frequency response (with no tuning)
  • Built-in signal conditioner and thermocouple circuit
  • Fully computer controlled using the Windows-based ThermalPro software
  • Ultra-low-noise circuits
  • Optional integrated calibration system
Amplifier drift0.3μV/°C
Amplifier input noise1.7 nV/-Hz and 1.5 pA/-Hz
Frequency response> 250 kHz (without tuning)
Resistance measurement0.1% ±0.01 ohms
Operating resistance2 to 80 ohms
Maximum probe current800 mA (1.6 A with high-power setting)
Cable length5 m; RG-58 A/U (other lengths available upon request)
OutputBridge voltage to 11.5 volts
Size17.8 cm x 48 cm x 41 cm (7 in. x 19 in. x 16 in.); standard 19 in. rack mount
Number of channelsUp to eight per cabinet; 16 channels supported by standard software
Input power100/120/220/240 VAC, 50-60 Hz, no switching required
Temperature measurementThermocouple circuit built-in for type-T thermocouple
 0 to 10 V in 10 mV steps, 0.15% accuracy
Gain1 to 1000 (1.0 MHz maximum bandwidth, 0.15% accuracy
Low pass filtersLinear phase, 12 Hz to 1 MHz; 13 settings; -60 dB/decade
High pass filters0.1, 1, 10 Hz; 60 dB/decade
Output (analog)-5 to +5V