This website uses cookies
In order to provide complete functionality, this web site needs your explicit consent to store browser cookies. If you don't allow cookies, you may not be able to use certain features of the web site including but not limited to: log in, buy products, see personalized content, switch between site cultures. It is recommended that you allow all cookies.

Turbo-Vaporizer 2841PE

SKU: 2841PE

The 2841PE MSP Turbo™ Vaporizer was designed for high flow water vapor. This model has the state-of-the art PE atomizer with on-board flow control, and dual heaters to combat evaporative cooling at high water flow rates.

Product Details


297 mm x 119 mm x 122 mm (11.7 in. x 4.7 in. x 4.8 in.)

Fittings (on the unit) Carrier Gas Inlet 1/4 in. VCR female split nut
Liquid Inlet 1/8 in. VCR female
Vapor Outlet 1/2 in. VCR female
Compressed Air 4 mm instant tube fitting
Wetted Parts SS 316, PEEK, PCTFE, PTFE, Kalrez®, Elgiloy®
Leak Integrity ≤1 x 10-8 Pa·m3/s Helium
Heater Power Requirements 220 VAC, 60 Hz, 600W
Carrier Gas Inert gas recommended
Max. Carrier Gas Flow1 8.5 standard L/min N2
(0-80 psig inlet pressure)
Max. Liquid Flow2 2,400 g/hr (TEOS or equivalent)
240 g/hr (H2O or equivalent)
System Pressure Limit 120 psig
Compressed Air 90 to 110 psig
Temperature Range 40°C to 160°C
160°C to 200°C with optional piezo cooling package
Vaporizer Body Vacuum tight chamber with multi-stage heat exchanger, SS 316 construction
Temperature Sensor 2 Type K thermocouples

Specifications subject to change without notice

1 Up to 15 standard L/min available.
2 Max. liquid flow is process dependent. The spec assumes a vaporizer temperature of 180° C or higher, Ar carrier gas from 4-7 SLPM, and pressure <50 Torr immediately downstream of the vaporizer.