800-680-1220 / +1 651-490-2860 (US) All Locations
English English

SEARCH

Turbo Vaporizer 2841PE

SKU: 2841PE

The 2841PE MSP Turbo™ Vaporizer was designed for high flow water vapor. This model has the state-of-the art PE atomizer with on-board flow control, and dual heaters to combat evaporative cooling at high water flow rates.


Discontinued
Recommended Replacement
*A newer model of this product is now available.

Product Details

Dimensions

297 mm x 119 mm x 122 mm (11.7 in. x 4.7 in. x 4.8 in.)
Fittings (on the unit) Carrier Gas Inlet 1/4 in. VCR female split nut
Liquid Inlet 1/8 in. VCR female
Vapor Outlet 1/2 in. VCR female
Compressed Air 4 mm instant tube fitting
Wetted Parts SS 316, PEEK, PCTFE, Elgiloy®, FFKM, PTFE
Leak Integrity ≤1x 10-9 Pa·m3/s Helium
Heater Power Requirements 120 VAC, 60 Hz, 500W
Carrier Gas Inert gas recommended
Max Carrier Gas Flow1 7.0 standard liters/min N2 at 80 psig
4.5 standard liters/min N2 at 50 psig
Max Liquid Flow2 2,400 g/hr (TEOS or equivalent)
240 g/hr (H2O or equivalent)
System Pressure Limit 150 psig
Compressed Air 90 to 110 psig
Temperature Range 40°C to 160°C
160°C to 200°C with optional piezo cooling package
Vaporizer Body Vacuum tight chamber with multi-stage heat exchanger, SS 316 construction
Temperature Sensor 2 Type K thermocouples

Specifications subject to change without notice

1 Max Carrier Gas Flow Rate is adjustable; visit www.tsi.com/contact to request more information.
2 Max liquid flow is process dependent. The spec assumes a vaporizer temperature of 180° C or higher, N2 carrier gas ≥4.5 SLPM, and pressure <10 Torr immediately downstream of the vaporizer.

Copyright © 2024 TSI. All Rights Reserved.