Turbo-Vaporizer 2841PE

Artikelnr: 2841PE

*Diese Seite ist leider nur in Englisch verfügbar.*

The 2841PE MSP Turbo™ Vaporizer was designed for high flow water vapor. This model has the state-of-the art PE atomizer with on-board flow control, and dual heaters to combat evaporative cooling at high water flow rates.

Nicht mehr lieferbar

Empfohlenes Ersatzproduct

*Ein neueres Modell dieses Produktes ist jetzt verfügbar.

Product Details

Dimensions	297 mm x 119 mm x 122 mm (11.7 in. x 4.7 in. x 4.8 in.)
Fittings (on the unit)	Carrier Gas Inlet	1/4 in. VCR female split nut
	Liquid Inlet	1/8 in. VCR female
	Vapor Outlet	1/4 in. VCR female
	Compressed Air	4 mm instant tube fitting
Wetted Parts	SS 316, PEEK, PCTFE, PTFE, Kalrez®, Elgiloy®
Leak Integrity	<1 x 10^-9 scc/sec Helium
Heater Power Requirements	208 VAC, 60 Hz, 500W
Carrier Gas	Inert gas recommended
Gas Inlet Pressure Range	0–80 psig inlet pressure
Max. Carrier Gas Flow Rate* N₂	15 standard L/min**
Max. Liquid Flow* TEOS equivalent	3,000 g/hr
Max. Liquid Flow* DI Water	300 g/hr
System Pressure Limit	120 psig
Compressed Air	90 to 110 psi
Temperature Range	40°C to 200°C
Vaporizer Body	Vacuum tight chamber with multi-stage heat exchanger, SS 316 construction
Temperature Sensor	Type K thermocouple

Specifications subject to change without notice
* Liquid and gas flow ranges are affected by liquid and gas type
** Standard model up to 7 standard L/min; up to 15 standard L/min available