Robotic arms working in modern semiconductor production cleanroom

提升半导体检测工具的精度

10nm Particle Deposition

In the rapidly evolving world of semiconductor manufacturing, the need for precise defect inspection and detection becomes increasingly critical as device features shrink to sub-10nm sizes. As semiconductor technology continues to advance, ensuring the highest quality and reliability of devices is paramount. In this blog post, we delve into a groundbreaking development in the realm of semiconductor manufacturing—precision 10nm particle deposition using a Particle Deposition System (PDS).

The Significance of Particle Deposition

One of the primary applications of the Particle Deposition System is the calibration of wafer and photomask defect inspection systems.In semiconductor manufacturing, the identification and classification of defects as small as 10nm are essential for maintaining high yields and quality. However, detecting such tiny defects poses significant challenges. To overcome these challenges, advanced inspection systems are required, and this is where particle deposition comes into play.

Understanding the Particle Deposition System

The Particle Deposition System (PDS) 2300G3 is a cutting-edge tool designed for the precise deposition of particles with known characteristics, including size, morphology, and optical properties. One of the primary applications of PDS is the calibration of wafer and photomask defect inspection systems. These systems rely on the intensity of light scattered by defects when illuminated by an intense laser to detect and characterize those defects.

The PDS operates in two modes: DMA mode and Direct mode. In DMA mode, a Differential Mobility Analyzer (DMA) is used to select a narrow range of particles from a particle suspension, providing high accuracy in particle size control. The system generates aerosolized particles by atomizing a dilute suspension in ultrapure water, and these particles are then classified based on electrical mobility in the DMA.

Challenges and Achievements in Particle Deposition

One of the most significant achievements attained with MSP’s 2300G3 PDS is the successful deposition of 10nm silica nanoparticles with precise control of particle size, deposit location, and areal number density. This achievement has been validated using advanced microscopy techniques, including Atomic Force Microscope (AFM) and Scanning Electron Microscope (SEM).

Insights from TEM Grid Deposition Attempts

Initial attempts to deposit silica particles on TEM grids, which are used for transmission electron microscopy, were unsuccessful. While challenges related to particle deposition and grid arcing were encountered, they shed light on the complexities of particle deposition at the nanoscale.

Deposition and Analysis on Silicon Wafers

Successful 10nm silica particle deposition was achieved on silicon wafers, followed by analysis using SEM and AFM. These analyses confirmed the precision of particle deposition, with particle sizes and areal number densities closely matching predictions.

Producing Devices with High Yield

In the ever-advancing semiconductor industry, precision is paramount. Successful validation of the ability of MSP’s PDS to deposit 10nm particles with predictable control of modal diameter and areal number density paves the way for the continued development of advanced defect inspection systems, ultimately contributing to the production of cutting-edge, high-performance semiconductor devices with high yield.

 

Learn More About Surface Defect Inspection and the Solutions We Provide - Click Here.
 

Related Resources

光罩污染标准- 半导体无名英雄

了解半导体制造中光罩污染标准这一关键但常被忽视的领域。

了解更多

掩膜的光刻工艺优化

掩膜的表面缺陷检测确保了高质量的光刻工艺。先进的检测系统提高了半导体制造的产量和效率。

了解更多

Validating Cleaning Equipment and Processes in Semiconductor Manufacturing

MSP的粒子去除效率(PRE)标准优化了清洁流程,在需要关注时发出警报,避免因污染造成的损失。

了解更多

确保高质量晶圆生产:粒子去除效率测试的重要性

半导体晶圆生产中的高良率和低缺陷依赖于有效的洁净系统。适当的验证确保污染物被去除,从而在生产过程中保持晶圆的完整性。

了解更多