Turbo-Vaporizer 2841PE

UGS: 2841PE

*Merci de noter que cette page est disponible en anglais uniquement.*

The 2841PE MSP Turbo™ Vaporizer was designed for high flow water vapor. This model has the state-of-the art PE atomizer with on-board flow control, and dual heaters to combat evaporative cooling at high water flow rates.

Discontinué

Remplacement recommandé

Un nouveau modèle de ce produit est maintenant disponible.

Détails du produit

Dimensions	297 mm x 119 mm x 122 mm (11.7 in. x 4.7 in. x 4.8 in.)
Fittings (on the unit)	Carrier Gas Inlet	1/4 in. VCR female split nut
	Liquid Inlet	1/8 in. VCR female
	Vapor Outlet	1/4 in. VCR female
	Compressed Air	4 mm instant tube fitting
Wetted Parts	SS 316, PEEK, PCTFE, PTFE, Kalrez®, Elgiloy®
Leak Integrity	<1 x 10^-9 scc/sec Helium
Heater Power Requirements	208 VAC, 60 Hz, 500W
Carrier Gas	Inert gas recommended
Gas Inlet Pressure Range	0–80 psig inlet pressure
Max. Carrier Gas Flow Rate* N₂	15 standard L/min**
Max. Liquid Flow* TEOS equivalent	3,000 g/hr
Max. Liquid Flow* DI Water	300 g/hr
System Pressure Limit	120 psig
Compressed Air	90 to 110 psi
Temperature Range	40°C to 200°C
Vaporizer Body	Vacuum tight chamber with multi-stage heat exchanger, SS 316 construction
Temperature Sensor	Type K thermocouple

Specifications subject to change without notice
* Liquid and gas flow ranges are affected by liquid and gas type
** Standard model up to 7 standard L/min; up to 15 standard L/min available