This website uses cookies
In order to provide complete functionality, this web site needs your explicit consent to store browser cookies. If you don't allow cookies, you may not be able to use certain features of the web site including but not limited to: log in, buy products, see personalized content, switch between site cultures. It is recommended that you allow all cookies.

Certifier™ Plus High Flow Module 4081

SKU: 4081

The Certifier™ Plus High Flow Module 4081 works with the Certifier™ Plus Interface Module 4089.

  • Flow Range: -200 to 300 Standard L/min
  • Gas Calibrations: Air, Oxygen, Air/Oxygen Mix, Nitrogen, CO2
  • Gas Conditions: STP, ATP, BTPS, BTPD, or user-defined
  • Connectors: 22 mm female ISO taper (inlet), 22 mm male ISO taper (outlet)

Product Details

The Certifier™ Plus High Flow Module 4081 is one half of the Certifier™ Plus Test Systems 4080-S and 4080-F and communicates measurements to the Interface Display Module. The high flow module contains calibrated sensors for bi-directional flows, barometric pressure (375 to 1200 mmHg), low pressure (-25 to 150 cm H2O), high pressure (-10 to 150 psig), and temperature (5 to 40°C ). The high flow module also includes a 3.5 mm mono audio jack capable of accepting an oxygen sensor (from the optional 4073 kit) to measure oxygen concentrations.

A flow module (Certifier™ Plus High Flow Module 4081 or Certifier™ Plus Low Flow Module 4082) must be used in conjunction with either the Certifier™ Plus Display Interface Module 4089 or Certifier™ FA+ Interface Module 4088 (discontinued). A Certifier™ Module 4081 may also be purchased individually (not as part of a Certifier™ Test System 4080-S or 4080-F) to replace an existing flow module or to have an additional flow module to maintain up-time if other flow modules are unavailable.

Test Applications

  • Ventilators (hospital, sub-acute, neonatal, home care)
  • Compressors
  • Oxygen concentrators
  • Air Oxygen blenders
  • CPAP devices
  • Medical insufflators
  • Any other devices needing to verify gas flow and pressures

Certifier™ FA Plus High Flow Module 4081 Includes:

  • Certifier™ FA Plus High Flow Module 4081
  • Inlet filter, 22 mm x 22 mm male/female
  • Adapter, 22 mm x 6 mm, for interfacing High Flow Module to Low Flow filter
  • Adapter, 15 mm ID x 22 mm OD
  • Adapter, high pressure port
  • Airway pressure fitting with screen
  • Pressure tubing, silicone, 1/8 inch ID x 1/4 inch OD x 48 inch (3.2 mm ID x 6.4 mm OD x 122 cm)
  • Velco® strap for use on High Flow Module