800-680-1220 / +1 651-490-2860 (US) All Locations

Powering On the Sensor Module

Step 1.

Hold down the power button located on the left side of the module for roughly 1 second.

Step 2.

Confirm that the LED on the front of the module is blinking blue (roughly twice per second).

NOTE:

All modules are shipped in ‘Sleep Mode’ to protect the battery during shipment and storage. It will not be possible to power on the Module, using the side button, until ‘Sleep Mode’ is disabled. To disable, plug the module into a power source and charge the module for a few minutes (see Charging Modules section). This process is required only once. Going forward the module can be powered on, using the above steps.