Module Studies are available only on the Core module and record data directly on the module itself.  The module only needs to be within BLE (Bluetooth® Low Energy) range when starting or stopping the study – it does not need to stay within range during data collection.  To record a Module Study:

 

Tap the orange "+" icon located in the lower-right corner of the Sensor Data screen and select Module Study.

                

 

Choose the desired logging interval.

Tap Start to begin recording.

• A green ’Module Logging Active’ status bar will appear, indicating that a Module Study is active.
• All connected Core Modules begin the study at the same time.
• If an additional Core Module is connected while a study is already in progress, one can start a new Module Study by following these steps again.
• To temporarily pause the study, tap the Pause button on the status bar. Tap again to resume recording.

               

 

Tap the Stop icon on the status bar to end recording. Confirm by tapping Stop. Study is saved on the module with a default name

Note:

• Core Module Control & Data Storage: The Smart Station is required to start, stop, or manage the Core module.  However, all data and studies are recorded directly on the Core module itself.  These actions must be performed while the Smart Station is within BLE (Bluetooth® Low Energy) range of the module.

• Active Timer for Module Study: When a Module Study is within progress on the Core module, the Active Timer shows the elapsed time since the study began.  This timer continues to count even if the study is paused.

• Display During Quick Start Studies: If a Quick Start Study is started while a Module Study is still running, the Active Timer for the Module Study will be temporarily hidden.  Once the Quick Start Study ends, the Module Study Active Timer will reappear – provided the Core module is back within BLE (Bluetooth® Low Energy) range to the Smart Station.