tsi logo

SEARCH

FSA Signal Processors for LDV Systems FSA4000-X

UGS: FSA4000-1
Discontinué

Product Details

The FSA series of signal processors is the most accurate and fast, designed for LDV and PDPA applications. The FSA processors offer many innovative features and benefits:

  • High Doppler frequency up to 175 MHz for dense spray and high speed flows
  • Multi-bit (8-bit) sampling for accuracy with Doppler burst sampling in poor SNR conditions
  • Frequency domain burst detection -A patented scheme that detects bursts based on the real-time SNR level (not simply burst amplitude)
  • Dynamic burst centering for accurate Doppler frequency measurement by extracting data from the highest-quality portion of  the signal
  • Intensity validation -A patented technique integrated at the electronic level, providing a totally independent (not based on phase) means of validating the measured particle diameter
  • Short transit time to ensure accurate size and velocity measurements for dense and high-speed spray, using very small measurement volumes
  • Signal optimization - The high level PDM output signal is down mixed, filtered and amplified before processing, to increase measurement accuracy

FSA Diagram

 

Signal ProcessorBenefits
FSA 3500 SeriesWith a maximum Doppler frequency of 100 MHz, it is an excellent cost/performance ration for general LDV measurements. The FSA 3500 series has all the patented features of the FSA 4000, but is also suitable for lower speed flows, typically under 100 m/s.
FSA 4000 SeriesWith a maximum Doppler frequency of 175 MHz, it is the highest speed signal processor for LDV. The FSA 4000 has the power and speed required for supersonic flow measurements.
FSA 3500-P SeriesWith a maximum Doppler frequency of 100 MHz, it is an excellent cost/performance ration for general PDPA measurements. The FSA 3500-P series has all the patented features of the FSA 4000-P, but is suitable for lower speed flows, typically under 100 m/s.
FSA 4000-P SeriesWith a maximum Doppler frequency of 175 MHz, FSA 4000-P is the highest speed signal processor for LDV. This model has the power and speed required for supersonic flow measurements.