2026 Casella Industrial Hygiene Webinar Schedule

Introduction to Noise at Work 

Casella cover what needs to be done under the Control of Noise at Work Regulations from 2005. From legal implications to responsibilities you have as an employer when it comes to monitoring for noise at the workplace. We will cover noise terminology and parameters, as well as dose calculations. The webinar will run for approximately 45minutes with additional time for questions at the end.

Date: 15 April 2026 

Monitoring for noise in the workplace.

Casella Insight Data Management software - How it works 

Performing a live demonstration of the software to educate users of the full process of importing data, viewing data, manipulating data, configuring devices, organising results and reporting data. Q&A to finish. Webinars will run for 90 mins, Q&A included.

Casella Insight data management overview.

Environmental Boundary Monitoring in Construction: Understanding Data 

Parameters and data used can be intimidating to those not familiar with environmental monitoring. Casella covers key parameters for noise, particulate, and vibration so a site manager can know their Leq from their PM10 and PPV! On top of understanding parameters, knowing how to use the data to not only monitor your site in the best way but helping prevent potential complaints will be covered. This will ultimately save the site time and cost. The webinar will run for approximately 30 minutes with additional time for questions at the end.

Date: 07 May 2026

Understanding environmental monitoring parameters.

Introduction to Air Sampling 

Keep up with the ever-changing requirements and the rigor of air monitoring and testing. Airborne hazards from fibers, gases, dust, and vapours can all cause potentially life-threatening illnesses affecting the lungs. Air sampling is a method of monitoring a worker's exposure to these potential hazards. But how do you go about this? What equipment do you need for each scenario? Join us on this webinar to explore the options and the best practices. The webinar will run for approximately 45minutes with additional time for questions at the end.

Date: 04 June 2026

Monitoring worker exposure to airborne hazards.

Introduction to HAV Monitoring 

Hand-Arm Vibration Syndrome (HAVS) is a serious condition that can be prevented with the correct control of exposure. This webinar reviews the terminology about HAV measurement, legislation and exposure limits, as well as how to measure exposure on the tool correctly and subsequently calculate exposure levels. The webinar will run for approximately 45minutes with additional time for questions at the end.

Date: 25 June 2026 

Measuring hand-arm vibration levels.

Introduction to Asbestos Sampling

Casella will provide a quick insight into the international use of asbestos, both now and historically. We will cover what is asbestos, the health risk associated with asbestos, where it has likely been used in buildings, and how air sampling is done. Many corporations are dealing with various complex asbestos issues. What are the risks of working with asbestos and is your company compliant with local legislation? The webinar will run for approximately 45minutes with additional time for questions at the end.

Date: 09 July 2026

Asbestos recognition and sampling methods.

Casella NoiseSafe Data Management software - dBadge2 - How it works 

Performing a live demonstration of the software to educate users of the full process of importing data, viewing data, manipulating data, configuring devices, organising results and reporting data. Q&A to finish. Q&A to finish. Webinars will run for 90 mins, Q&A included.

Date: 16 July 2026 

Managing dBadge2 data in NoiseSafe.

Use of SLMs and Noise Dosimeters; the best practice guide! 

Casella cover the principles of when to use a noise dosimeter or sound level meter, with the pros and cons of each. The ‘dos and don’ts’ of each type of instrument and reviewed, giving a best practice guide to get the most out of your noise instruments. The webinar will run for approximately 45minutes with additional time for questions at the end.

Date: 03 September 2026 

Choosing between SLMs and Dosimeters.

Environmental Boundary Monitoring in Construction: Best Practice 

Boundary monitors can measure dust, noise, ground vibration, and wind parameters. Getting accurate measurements from these units to ensure quality data for reporting and preventing environmental complaints is critical. This webinar covers the correct siting and installation of monitoring units to ensure compliance with guidance and legislation and ensures an understanding of the operation and maintenance of the sensor in line with best practices. The webinar will run for approximately 45minutes with additional time for questions at the end.

Date: 24 September 2026 

Best practices for siting boundary monitors.

Casella 24/7 - Guardian 2 data management solution - How it works 

Demonstration of process flow of data management for the Guardian 2. Managing your Guardian, Users, Reports, Alerts and much more. Explanation of hierarchy and how everything is linked to create a homogenous data management process.

Date: 06 October 2026Time: 2:30pm GMT Register Now

Guardian 2 data management hierarchy.

Introduction to Dust Sampling 

Dust monitoring using air sampling pumps has a number of different facets covered during this webinar. These include types of dust to measure and the selection of equipment such as sampling heads or filters. Calculation of airborne concentration, and more importantly exposure, also reviewed over this webinar. The webinar will run for approximately 45minutes with additional time for questions at the end.

Date: 15 October 2026 

Selecting equipment for dust monitoring.

Setting up Air Sampling Pumps 

Setting up air sampling pumps and their associated items is paramount to ensuring accurate exposure data. This webinar covers selecting the correct pump, setting up the ‘sample train’ and ensuring accurate flow, as well as best practices to ensure good quality data. The webinar will run for approximately 45minutes with additional time for questions at the end.

Date: 19 November 2026 

Setting up a sample train for accurate flow.

What regulations are discussed in the Noise at Work webinar?

The webinar covers the Control of Noise at Work Regulations from 2005. It details the legal implications and employer responsibilities for workplace monitoring, noise terminology, and dose calculations.

How long is the air sampling training session?

The Introduction to Air Sampling webinar runs for approximately 45 minutes. This time includes a technical presentation followed by a dedicated session for attendee questions at the end.

Are software demonstrations live during the webinars?

Yes, software sessions like Casella Insight and NoiseSafe involve live demonstrations. These sessions are designed to show the full process of importing, viewing, and manipulating monitoring data.