|
|
TSI Software and FirmwareThe following TSI software and firmware is available for download on this Web site (Please note: TSI Software and Firmware currently does not work with 64 bit Windows® operating systems. Compatible with 32 bit Windows® operating systems only): - PORTACOUNT® PRO and PORTACOUNT® PRO+ Firmware v2 Update
This field-flashable firmware reprograms your PORTACOUNT® PRO and PORTACOUNT® PRO+ Respirator Fit Tester with the latest available version of operating firmware.
FitPlus™ v3.4.2 Fit Test Software (11.6 MB)
This updated version 3.4.2 of FitPlus™ software provides support for Model 8020/8028 PORTACOUNT® Plus as well as the new Model 8030/8038 PORTACOUNT® Respirator Fit Testers.
- FitPlus™ v3.3.1 Fit Test Software
- FitPlus™ v3.x Military Protocol and Mask Setup Program
Add U.S. military fit test protocols and gas mask definitions to FitPlus v3.xStarting with version 3.3.0, FitPlus™ software will operate with the U.S. military version of the PORTACOUNT® known as the M41 Protective Assessment Test System (PATS). M41 PATS users may download FitPlus software at no additional cost. U.S. Military gas masks and exercise protocols may be entered into FitPlus manually, or automatically by downloading and then running the AddUSMILdataSetup.exe program. Please print the Adding U.S. Military Protocol instructions beforehand.
- DUSTTRAK™ II and DRX Firmware Update
This field-flashable firmware reprograms your DUSTTRAK™ II and DRX Aerosol Monitor with the latest available version of operating firmware.
- TrakPro™ Data Analysis Software
This unique software helps you pre-program instruments, store and organize your test data, as well as generate the detailed graphs and reports needed to effectively communicate your measurement results. Click here to view TrakPro™ software installation guide.
- v4.3.0 TRAKPRO™ Data Analysis Software for Windows® XP, Vista®, 7 (zip file 52 MB)
- v4.2.2 TRAKPRO™ Data Analysis Software for Windows® XP, Vista® (zip file 82 MB)
- v3.62 TRAKPRO™ Data Analysis Software for Windows® XP, 2000 (zip file 5.7 MB)
- v3.41 TRAKPRO™ Data Analysis Software for Windows® XP, 2000, ME, NT, 98 (exe file 4.7 MB)
- LOGDAT1™ (RS-232) for Windows® v1.0.0
The LogDat1™ (RS-232) software transfers stored data to a computer spreadsheet program. It is necessary for downloading data from TSI Models 8710 and 8375, Alnor® Models EBT 720 and EBT 721, and Airflow™ Instruments Models PH720 and PH721.
- LOGDAT1™ (RS-232) for Windows® (35 MB) ZIP
- LOGDAT2™ for Windows® v1.2.0
The LogDat2™ software transfers stored data to a computer spreadsheet program. It is necessary for downloading data from TSI® Models 5725, 5825, 7425, 7525, 7535, 7545, 7565, 9535, 9545, and 9555, Alnor® Models AVM430, AVM440, CF920, CF930, TH920, RVA501 and AXD620, Airflow Instruments™ Models TA430, TA440, TA460, IAQ920, RH720, LCA501, and PVM620. Click here to view LogDat2™ software installation guide.
- LOGDAT2™ for Windows® (39 MB) ZIP
- LOGDAT™ for Windows® v2.13.00 (discontinued)
The LogDat™ software transfers stored data to a computer spreadsheet program. It is necessary for downloading data from the ACCUBALANCE® Plus Air Capture Hood Models 8372, 8373, 8375 and older TSI instruments.
- LOGDAT™ for Windows® v2.13.00
- COMPUDAT™ (RS-232) for Windows® v2.12.01
The CompuDat™ (RS-232) software transfers stored data to a computer spreadsheet program. It is necessary for downloading data from Alnor Models AXD560, RVD, CF8650, CF8652, CF8585, and CF8586.
- COMPUDAT™ (RS-232) for Windows® (5.5 MB) ZIP
- COMPUDAT™ (USB) for Windows® v1.0.0
The CompuDat™ (USB) software transfers stored data from the Alnor® HM680 Hydronic Manometer to a computer spreadsheet program.
- COMPUDAT™ (USB) for Model HM680 (32 MB) ZIP
- CertiTest Pepclr.exe Software
Pepclr.exe software for removing "unassigned message #" or "user memory full" message from TSI Models 8127 & 8130 Automated Filter Testers. Click here to view the installation guide.
- CertiTest® Software (76.0 kb)
- Particle Instruments Software (Particle Instruments Released Software Versions)
|